The common home router is the key equipment for home network deployment. Many people have the experience of purchasing and setting up the router. I would like to share with you the methods and steps of setting up the 4G Cellular Router. 4G Cellular Routers are typically used in industrial or commercial networking scenarios, such as smart parking lots, mountain areas, factories, and other environments.

Let's take the PUSR Cellular Router USR I'm using, G806w, as an example.

After we get the Cellular Router, use the standard power supply to power on the router, and then use the network cable to connect the PC end and the LAN port of the Cellular Router, and then we can set up the network.

First, open the login interface. Locate the factory-configured IP address (typically 192.168.1.1) on the nameplate on the bottom of the Cellular Router. Open Internet Explorer, enter the IP address in the address bar, and press Enter to enter.

Second, log in to the webpage management interface. Take Cellular Router G806 as an example, the login user name and password are both root. Log in to the Web configuration interface.

Third, the choice of Internet access. There are generally three ways to access the Internet in the setting interface: static IP, dynamic IP and ADSL virtual dialing. According to the requirements of Cellular Router, choose the right way to access the Internet.

Fourth, set the Cellular Router wireless parameters. This page is mainly used to set the basic parameters and wireless network security. Pay special attention to wireless security options and configure encryption passwords.

Fifth, restart the Cellular Router.

From the above, we can see that there are many similarities between the setting of Cellular Router and the setting of ordinary home routers. Comparing and referring to each other, it will not be difficult for you who are reading the article.